Alloy Steel Round Bars
Ordering guidance for EN19 and AISI 4140 round bar requirements in defined standards, diameters, conditions and inspection scopes.
Jain Steels Group reviews EN19 and AISI 4140 round bar enquiries for shafts, gears, heavy engineering components and demanding machined parts. Buyers should identify the exact grade designation and governing standard; the two names are often cross-referenced, but they are not a substitute for an approved material specification.
State whether the bar will be forged, machined or heat treated, together with diameter, length, tolerance, supply condition, testing and certification. Availability and any equivalent-standard proposal are confirmed only after technical review of the buyer’s specification.
Share Your RequirementPublished information is a general supply reference. The final quotation and approved purchase specification control every order.
| Product category | Alloy Steel Round Bars |
|---|---|
| Grade availability | EN19 or AISI 4140 as separately specified; any equivalence proposal requires technical review |
| Published size information | 25 mm to 66 mm published round-bar diameter range |
| Length and tolerance | Confirmed against the drawing, standard and purchase requirement |
| Supply condition | Confirmed against the grade, downstream process and applicable standard |
| MOQ and lead time | Confirmed after grade, size, quantity and destination review |
EN19 and AISI 4140 are chromium-molybdenum alloy-steel designations that are commonly discussed together. They should not be ordered only as “equivalent.” Standards can differ in permitted chemistry, delivery condition, test requirements and certification.
| Do not send only | Send this instead |
|---|---|
| 4140 round bar | AISI/SAE 4140 plus the governing standard, revision and required supply condition. |
| EN19 equivalent | EN19 plus the applicable British/Indian/customer specification and acceptance values. |
| 50 mm bar | Diameter, tolerance, cut length, machining allowance and quantity. |
| For shaft use | Component drawing, heat-treatment route, hardness or mechanical requirement and inspection scope. |
If either designation is acceptable, state that in the enquiry and identify which standard controls acceptance. Jain Steels Group will confirm the offered grade and documentation before order approval.
Define the loading, final heat treatment, required properties, machining allowance and dimensional tolerance.
State the grade standard, component drawing, heat-treatment route and hardness or strength requirement.
Specify section size, supply condition, testing, traceability and any third-party inspection.
Identify the forging route, surface and internal-soundness acceptance, cut length and certification needs.
Chemistry, dimensions, mechanical requirements, traceability and MTC needs are agreed against the purchase specification.
Use the quality assurance page for the overall inspection approach and the technical data page for published size references.
Include the applicable standard, required heat-treatment condition, component drawing, machining allowance, quantity and delivery destination with an EN19 enquiry.
Use these supporting resources to define the grade, standard, dimensions, condition and inspection requirements before requesting a quotation.
Continue to relevant product, technical and company information.
No automatic identity should be assumed. They are commonly cross-referenced chromium-molybdenum grades, but the governing standard, chemistry limits, supply condition and required properties must be checked for the specific order.
The site publishes a general round-bar diameter range of 25 mm to 66 mm. Grade-size-condition availability is confirmed for each AISI 4140 or EN19 enquiry.
The controlling values depend on the specified standard and condition. Include the required chemistry, mechanical values, heat treatment and certificate scope in the enquiry.
Share the exact grade designation, governing standard, diameter, length, condition, quantity, destination, component application and inspection requirements.
Send the technical specification, quantity and delivery location for availability and quotation.
Contact Jain Steels Group